Anechoic Chamber, as the name suggests, refers to a room without reflection. Usually, its walls are covered with sound-absorbing materials with good sound-absorbing properties, so that there is no reflection of sound waves in the room.

The sound-absorbing materials used in anechoic chambers generally use a gradient absorption layer, often with a wedge or cone structure. Glass wool is used as the sound-absorbing material, and soft foam plastics are also used. Since the 1940s, the principle of gradual transition has been applied to make porous (or fibrous) materials into conical or wedge-shaped sound absorbers, collectively referred to as sound-absorbing wedges. When a sound wave is incident from the tip, due to the gradual transition nature of the sound-absorbing layer, the acoustic impedance of the material can be better matched with the acoustic impedance of the air, so that the sound wave is transmitted into the sound absorber and is efficiently absorbed. So far, high-quality anechoic chambers at home and abroad all use wedge structures as sound absorbers.
Anechoic Wedges are a special type of sound absorber that require almost all sound waves incident on its surface to be absorbed. Anechoic Wedges are composed of a base part and a split part. The base part is the unchanged part of the bottom section, and the split part is the part where the cross section gradually increases from the tip. Since the split section of Anechoic Wedges gradually increases from small, it matches the characteristic impedance of air, so that the incident sound waves are completely absorbed with almost no reflection.
The sound absorption characteristics of Anechoic Wedges are related to the length of the wedge, the filling material, and the depth of the cavity. For the same material, the longer the length of the wedge, the better the low-frequency sound absorption performance of the wedge. Adjusting the cavity depth can also effectively improve the low-frequency sound absorption properties of the wedge structure. The length ratio between the base of the wedge (the part with constant cross-section) and the length of the split part (the part with changing cross-section) is usually controlled at about 1:4. Neither too large nor too small is appropriate.
Anechoic Wedges can be divided into pointed and flat ends according to their shapes. According to the number of splits in one unit of Anechoic Wedges, it can be divided into single split, double split, and triple split. It can be divided into long wedge and short wedge according to the length of the wedge. According to the different types of wedge sound-absorbing materials, they can be divided into Anechoic Wedges such as inorganic fiber sound-absorbing materials, organic fiber sound-absorbing materials, and sound-absorbing foam (melamine foam).
The main purpose of Anechoic Wedges is to build an anechoic chamber. An anechoic chamber is a room where Anechoic Wedges are installed on the surface so that the sound waves incident on it are almost completely absorbed without reflection. A room with Anechoic Wedges installed on the floor, ceiling and walls is called a full anechoic chamber, which is suitable for acoustic research and acoustic property testing of audio equipment. Anechoic Wedges are installed only on the ceiling and walls of the room, and the floor is made of a hard and smooth sound reflection surface (such as terrazzo, marble floor). The anechoic chamber is called a semi-anechoic chamber and is suitable for noise testing of electromechanical equipment.
SINOYQX melamine foam has excellent sound absorption (0.96NRC), flame retardant (B1, extinguishes when removed from fire), heat insulation, light weight, and environmentally friendly (does not contain any halogenated hydrocarbons, flame retardants and/or toxic heavy metals, comply with the EU EN717-1 formaldehyde emission standard) and easy secondary processing (customized processing of various standard performance sizes according to customer conditions). It can replace traditional sound-absorbing materials, such as glass wool (not environmentally friendly), polyester fiber (poor acoustic performance), etc. SINOYQX melamine foam Anechoic Wedges in light gray or other customized colors are widely used in various professional acoustic fields, such as anechoic chambers, semi-anechoic chambers, reverberation chambers, silent rooms, and other professional acoustic applications.
Features of the SINOYQX Anechoic Wedges Acoustical Melamine Foam for Anechoic room & semi-anechoic room
- Class 1 fire-rated acoustical melamine foam
- Controlling all frequency sound
- Lightweight, completely open cell porous melamine foam
- Fiber-free and EN717-7 certified
- Flammability, meets UL-94V-0, flame spread=10
- Withstands constant temperatures up to 320°F
- Easy to install and beautiful and professional results
- Available in both natural white and gray color, other colors to be customized
For more information about SINOYQX Melamine Foam, please reach us at [email protected] or voice to us: +86-28-8411-1861.
Some pictures and texts are reproduced from the Internet, and the copyright belongs to the original author. If there is any infringement, please contact us to delete.
